Dual Smart Charger for 1~6S Lithium Battery Charger Power 200W
Charge Current 12A*2 Discharge Current 3A*2
Specification
| Input Voltage: AC 100~240V | Supported Batt. Type: LiFe/Lilon/LiPo/LiHv (1~6S) |
| Charge Current: 0.1~12.0A*2 | NiMH/Cd(1~16S) |
| Discharge Current: 0.1~3.0A*2 | Pb(1~12S) |
| Max Charge Power: 200W | Display: 2.4" 320x240 IPS LCD |
| Max Discharge Power: 5W*2 | Operating Temperature: 0~40°C |
| Balance Current: 1A/Cell*2 | Storage Temperature: -20~60°C |
| Balance Cells: 1~6S*2 | Dimensions: 120x108x70mm |
| Weight: 510g |
| 1. AC input | 2. USB port | 3. Update port | 4. Balance port for channel 1 |
| 5. Battery port for channel 1 | 6. Battery port for channel 2 | 7. Balance port for channel 2 | 8. Channel 1 select button |
| 9. Channel 2 select button | 10. 2.4" IPS display | 11. Speed shuttle key | |
How to Confirm Charging Current
It is very important to know the maximum charging current of the
battery as excessive current could influence the life span of
battery and/or cause damages. In addition, excessive current can
cause heating and/or explosion of the battery during the charging
process.
The charging and discharging capacity of battery is usually marked
with C value. Multiplying the charging C value and battery capacity
equals to the maximum charging current supported by the battery.
For example, for a 1000 mAh battery with a charging capacity of 5C,
the maximum charging current would be 1000*5=5000mA; therefore, the
maximum charging current is 5A.
For a lithium battery, if it is impossible to confirm the supported
charging C value, please set the charging current below 1C for the
sake of its (lithium battery) safety.
The reference relation between C value and charging time: charging
time ≥60 minutes/ charging C value (it therefore needs around 60~70
minutes to complete charging with 1C). Due to differences in
battery conversion eciency, the period to complete the charging
might be
extended.
Warnings and Safety Tips
The following safety tips are essentially important. Please
strictly follow the manual’s instructions in operation to guarantee
safety. Improper operation or incorrect working parameter settings
may cause damages to the charger and battery and/or result to a
fire.
Do not use the charger in an unattended manner; in case of any
functional abnormity, please stop using it and refer to the manual.
Keep the charger away from dust, humidity, rain and high
temperature, as well as avoid direct exposure to the sun and
intense vibration.
Make sure input voltage for D2 is AC 100-240V.
Please place the charger on a heat-resisting, non-flammable and
insulating surface. Do not use it by placing it on the car’s seats,
carpet or other similar places. Keep inflammable and explosive
objects away from operation areas of the charger.
Make sure the heat emission hole at the bottom of the charger is
uncovered while in use, and ensure the cooling fan smoothly
extracts heat.
Please fully understand the charging and discharging
characteristics as well as the battery’s specifications.
Additionally, set up proper charging parameters in the charger.
Incorrect setting of parameters can cause damage to the charger and
battery and/or result to disastrous consequences such as fire or
explosion.
When charging or discharging is completed, please press the speed
shuttle key to terminate current task, and remove the battery when
the charger shows the standby screen.
